Advertisement
11
Slide 1 x drawer bottom (P12) into the grooves on the panels (P8, P10, P11) as shown.
Repeat this step for the other 2 x drawers.
12
18 x Long Screw
(H10)
Align 1 x drawer back (P9) to the assembled drawer. Ensure the pre-drilled holes on the
left and right drawer panels (P10, P11) and drawer support (P13)
align with the pre-drilled holes on the drawer back (P9).
Secure together using 6 x long screws (H10), completely tightening with
a phillips head screwdriver.
Repeat this step for the other 2 x drawers.
(H10)
(H10)
X3
(H10)
(P9)
(H10)
(H10)
Page 10
Advertisement
