Adc Interface; Motor Drive Interface - Quectel SC200E Series Manual

TP_I2C_SDA
CAM0_I2C_SCL
CAM0_I2C_SDA
CAM1_I2C_SCL
CAM1_I2C_SDA
SENSOR_I2C_SCL
SENSOR_I2C_SDA

3.15. ADC Interface

The module supports one Analog-to-Digital Converter (ADC) interface. The ADC interface supports
resolution of up to 15 bits. The pin definition is shown below.
Table 18: Pin Definition of ADC Interface
Pin Name Pin No.
ADC 128

3.16. Motor Drive Interface

The pin definition of the motor drive interface is listed below.
Table 19: Pin Definition of Motor Drive Interface
Pin Name Pin No.
VIB_DRV_P 28
SC200E_Series_Hardware_Design
48 OD TP I2C data
83 OD I2C clock of camera 0
84 OD I2C data of camera 0
166 OD I2C clock of camera 1
205 OD I2C data of camera 1
91 OD I2C clock for external sensor
92 OD I2C data for external sensor
I/O Description
AI General-purpose ADC interface The maximum input voltage is 1.875 V.
I/O Description
Vibration motor driver
PO
output control
Smart Module Series
1.8 V externally. Can be
used for other I2C
devices.
Can only be used for
camera I2C devices.
Can only be used to for
sensors.
Comment
Comment
Connect it to the positive pole of the motor.
53 / 115