Quectel SC200E Series Manual page 22

UART Interfaces
SD Card Interface
(U)SIM Interfaces
I2C Interfaces
ADC Interface
Real Time Clock
Antenna Interfaces
Physical
Characteristics
Temperature Range
Firmware Upgrade
RoHS
4
Within operating temperature range, the module meets 3GPP specifications.
SC200E_Series_Hardware_Design
up to 5 Gbps on USB 3.1 and 480 Mbps on USB 2.0
⚫
Supports USB OTG
⚫
Used for AT command communication, data transmission, software
debugging, and firmware upgrade
Three UART interfaces: UART0, UART1, and UART4 (debug UART)
⚫
UART0: four-wire UART interface supporting RTS and CTS hardware flow
control
⚫
UART1: two-wire UART interface
⚫
UART4 (debug UART): two-wire UART interface used for debugging by
default
⚫
Supports SD 3.0
⚫
Supports SD card hot-plug
⚫
Two (U)SIM interfaces
⚫
Supports USIM/SIM cards: 1.8/2.95 V
⚫
Supports Dual SIM Dual Standby (supported by default)
⚫
Four I2C interfaces
⚫
Used for peripherals such as camera, sensor, touch panel, etc.
One generic ADC interface, up to 15-bit resolution
Supported
SC200E-CE/EM/NA:
Main antenna, Rx-diversity antenna, GNSS antenna and Wi-Fi/Bluetooth
antenna interfaces
SC200E-WF:
Wi-Fi/Bluetooth antenna interface
⚫
Size: (40.5 ±0.15) mm × (40.5 ±0.15) mm × (2.85 ±0.2) mm
⚫
Package: LCC + LGA
⚫
Weight: Approx. 10.3 g
⚫
Operating temperature range
⚫
Storage temperature range: -40 °C to +90 °C
⚫
USB interface
⚫
OTA
All hardware components are fully compliant with EU RoHS directive.
4
: -35 °C to +75 °C
Smart Module Series
21 / 115