Table of Contents
Advertisement
Only Aruba-approved power cords may be used with Aruba devices. To access power cord information
for your switch, see
approved power cords. If your installation requires a different power cord than the one supplied with the
switch and/or power supply, be sure that the cord is adequately sized for the current requirements of
the switch. In addition, be sure to use a power cord displaying the mark of the safety agency that defines
the regulations for power cords in your country/region. The mark is your assurance that the power cord
can be used safely with the switch and power supply.
Do not use a damaged or non-recommended power cord with your switch. Using such power cords
voids the switch and power supply warranty. It can also cause serious electrical problems, including
injury or death to personnel, and damage to the switch and other property. If you cannot verify that you
have a power cord approved for use with your switch model, contact your authorized Aruba dealer or
sales representative for assistance.
Remove the power cord from the switch before mounting or dismounting the switch.
Power Consumption
Switch
Aruba 9300-32D 32p 100/200/400G QSFP-DD 2p 10G SFP+ Front-to-Back 6 Fans 2 AC
PSU Bundle (R9A29A)
Aruba 9300-32D 32p 100/200/400G QSFP-DD 2p 10G SFP+ Back-to-Front 6 Fans 2 AC
PSU Bundle (R9A30A)
Aruba 9300-32D 32-port 100/200/400G QSFP-DD 2-port 10G Switch (R8Z96A)
Max power measured with maximum traffic, transceivers and fans.
n
Idle power measured with no transceivers or cables installed at room temperature.
n
Environmental Specifications
Operating temperature
Included
Parts. Lost or damaged power cords must be replaced only with Aruba-
Specifications
For R8Z96A: Fan F2B: 45C°; B2F: 35C°
0°F to 104°F (0°C to 40°C) up to 5000 ft derate -1°C for every 1000 ft
from
5000 ft to 10000 ft
Power consumption
Max: 675 W
Idle: 210 W
Max: 688 W
Idle: 221 W
Max: N/A
Idle: N/A
Specifications
|
49
Advertisement
Table of Contents
Troubleshooting
