Tripp Lite SMART600PSGLCD Owner's Manual page 2

1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation and
storage of this product. Do not operate the UPS before reading all safety information and operating
instructions thoroughly. Comply with all warnings and operating instructions. Failure to heed these warnings
may affect the warranty.
Transportation
• Transport the UPS system only in the original package to protect against shock and impact.
Preparation
• Do not dismantle the UPS system. There are no user-serviceable parts.
• Do not plug the UPS input into its own output.
• Do not attach a power strip or surge suppressor to the UPS.
• Do not attach non-computer-related items, such as medical equipment, life-support equipment, microwave ovens or
vacuum cleaners to UPS.
• Condensation may occur if the UPS system is moved directly from a cold environment to a warm environment. The
UPS system must be completely dry before installation. Allow at least two hours for the UPS system to acclimate to the
environment.
• Do not install the UPS system near water or in a moist environment.
• Do not install the UPS system where it will be exposed to direct sunlight or heat.
• Do not block the ventilation openings in the UPS housing.
Installation
• This UPS intended for installation in a controlled environment (temperature-controlled, indoors and free of conductive
contaminants). Avoid installing the UPS in locations where there is standing or running water or excessive humidity.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the
unit's internal cooling, eventually causing product damage not covered under warranty.
• Caution - Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Operation
• Keep fluids and other foreign objects away from the interior of the UPS system.
• Do not connect appliances or devices which would overload the UPS system to the UPS outlets.
• Place cables in such a way that no one can step on or trip over them.
• Do not connect household appliances, such as hair dryers, to UPS output sockets.
• The UPS system can be operated by individuals with no previous experience.
• Connect the UPS system only to a properly grounded AC power outlet that is easily accessible and close to the UPS system.
• Use only a VDE-tested, UL-marked power cable (e.g. the power cable of your computer) to connect the UPS system to the
building wiring outlet (grounded outlet).
2