Tripp Lite SMART600PSGLCD Owner's Manual page 13

8. Operation
LCD Data Reporting Screens
The UPS allows you to scroll through a set of 14 information screens of measurement values regarding the UPS, Utility Power
and firmware version information. To scroll through the available set of screens, press the UP/DOWN button repeatedly.
No. Selectable Information
1 Input Voltage
2 Input Frequency
3 Battery Voltage
4 Battery Capacity
5 Estimated Backup Time
6 Output Voltage
7 Output Frequency
LCD Screen Additional Information
Values indicate the AC input voltage the UPS is receiving
through the input power cord.
Values indicate the AC input frequency (Hz) the UPS is
receiving through the input power cord.
Values indicate the DC voltage of the main lead-acid battery
system powering the UPS output during power failures.
Values indicate the charge percentage of the main lead-acid
battery system that powers the UPS output during power
failures.
Values indicate the estimated battery runtime the UPS
provides during a power failure at the current load and
battery-charge levels.
Values indicate the AC output voltage provided to connected
equipment via UPS output receptacles.
Values indicate the AC output frequency (Hz) provided to
connected equipment via UPS output receptacles.
13