Advertisement
28 electrolux
1
When inserting the rails, make sure that
the retaining pins on the telescopic run-
ners are pointing to the front.
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place.
Cleaning the oven shelf runner
Clean oven shelf runners with hot water and
washing up liquid.
1
Important: The oven shelf runners can-
not be cleaned in the dishwasher.
1
Important: On no account grease tele-
scopic runners.
1
Information regarding use in appli-
ances with pyrolytic cleaning:
The oven shelf runners must be re-
moved before pyrolytic cleaning is
carried out.
Oven lighting
1
Warning: There is a danger of electric
shock! Prior to changing the oven light
bulb:
–
Switch off the oven!
–
Remove the fuses in the fuse box or
switch off the circuit breaker.
3
Place a cloth on the oven floor to protect
the oven light and glass cover.
Replacing the oven light bulb/cleaning
the glass cover
1.
Remove the glass cover by turning it
anti-clockwise and then clean it.
2.
If necessary:
Replace bulb with a 40 watt, 230 V,
300 °C heat-resistant oven light
bulb.
3.
Refit the glass cover.
Changing side oven light/
Cleaning glass cover
1.
Remove the left shelf support rail.
2.
Remove the glass cover with the aid of
a narrow, blunt implement (e. g., tea-
spoon) and clean it.
3.
If necessary, exchange the halogen
oven lamp.
Order replacement lamp from Customer
Service (see under Service/Customer
Service).
Advertisement
