Advertisement
26 electrolux
Cleaning and Care
1
Warning: First switch off the appliance
and let it cool down before carrying out
any cleaning.
Warning: For safety reasons, do not clean
the appliance with steam blasters or high-
pressure cleaners.
Attention: Do not use any corrosive
cleaning fluids, sharp objects or stain
removers.
Do not clean the glass oven door with abra-
sive fluids or metal scrapers, which could
scratch the surface. The glass could crack
and shatter.
Outside of the appliance
•
Wipe the front of the appliance with a
soft cloth and a solution of hot water
and washing up liquid.
•
For metal fronts, use normal commer-
cially available cleaning agents.
•
Please do not use scouring agents and
abrasive sponges.
Oven interior
1
Warning: For the purpose of cleaning
the oven must be switched off and have
cooled down.
3
Clean the appliance after each use. In
this way, residue is easier to clean off
and does not have the chance to burn
on. Residue that is not removed may
cause changes to the surface colour
when Pyrolytic is used.
1. The oven light switches on automatically
when the oven door is opened.
2. After every use, wipe the oven with a so-
lution of washing-up liquid and allow to
dry.
3
In the event of stubborn dirt, clean using
Pyrolytic.
1
Important: If you are using an oven
spray, be sure to follow the manufactur-
er´s instructions.
Accessories
Wash all slide-in units (shelf unit, baking tray,
shelf support rails etc.) after each use and
dry well. Soak briefly to make them easier to
clean.
Fat Filter
1.
Clean the fat filter in hot water and
washing up liquid or in the dishwasher.
2.
Badly burned on soiling can be removed
by boiling the filter in a little water to which
2-3 tablespoonsful of dishwasher clean-
er has been added.
Pyrolytic
1
Warning: During this process the oven
gets extremely hot. Keep small children
away.
1
Important Before carrying out the Py-
roluxe process, all removable parts, in-
cluding the side rails, must be removed
from the oven.
3
The oven shelf runners must be re-
moved before starting Pyroluxe.
If any shelf runners are still in the oven, a
message to this effect will appear in the dis-
play. You will not then be able to start the Py-
roluxe process because of a safety cut-out
to protect the oven shelf runners.
1.
First remove the worst of the residue
manually.
2.
Use
or
to select the cleaning op-
tion.
3.
Confirm by pressing
4.
Use
or
to select the Pyrolytic op-
tion.
5.
Confirm by pressing
6.
Use
or
to select the Pyroluxe dura-
tion.
.
Advertisement
