Table of Contents
Advertisement
Product Overview
Component
Mounting bracket
Mounting screw guides
Mounting plate
Wiring diagram label
56-pin card edge connector
Quiet-Front Connector Modules
Ground wire connector
Ground wire access
Air vent/breather cap
3/8 in. padlock shackle holes
Cable stub
Cable lock nut
Cable rifting
4
Table 1. HRE-450 List 4A Components
Function
Secures the HRE-450 List 4A to the installation location.
Indicate where to drill the mounting screw holes.
Secures the remote unit or doubler in the enclosure.
Provides installation wiring diagram for both DS1(T1) and G.703 circuits.
Provides card edge connectivity for the installed remote or doubler unit.
Provides Tip and Ring wiring entry holes for HDSL connectors J1 through J4.
Used to attach the grounding wire.
Provides access for insertion of ground wire lug.
Permits air circulation and keeps internal atmosphere free of harmful contaminants.
Used to attach a padlock for security.
Provides access for transmit and receive HDSL connector wires.
Secures the cable rifting and stub to the enclosure.
Provides strain relief for the stub.
August 18, 1998
150-450-141-02, Issue 2
HRE-450 List 4A
Advertisement
Table of Contents
