PROAIM Cinema Series Assembly Manual page 3


The height of the Cyrus Pro-Mitchell is now
increased, as shown in the image.

Loosen the ratchet knob of Cyrus Pro Mitchell
Hi-Hat and stretch the Hi-Hat legs according
to your requirement.

The Cyrus Pro Mitchell Hi-Hat legs are now
appropriately stretched, as shown in the
image.

Use the ratchet knob to position the ground
feet on the Cyrus Pro Mitchell hi-hat.

After positioning the ground feet, secure
them with the help of the Ratchet knob by
tightening the knob properly, as shown in the
image.
Remove Foot from Telescopic Legs

Remove the foot from the telescopic legs by
loosening the ratchet knob.
3