PROAIM Cinema Series Assembly Manual page 2

Cyrus Pro Mitchell Setup

Loosen the knob of Cyrus Pro Mitchell Hi-Hat
and remove its low Hi-Hat legs.
NOTE: It is Set of 3" legs which directly mounts
to Mitchell's head for low hi-hat shots .

The low Hi-Hat legs of Cyrus Pro Mitchell
Hi-Hat are now removed, as shown in the
image.

Join the telescopic legs to Cyrus pro-Mitchell
Hi-Hat with the help of the ratchet knob.

Tighten the ratchet knob properly, as shown in
the image.
NOTE: Proaim Hi-hat's extendable legs offer
quick adjustments to level it on any uneven
Surface.
NOTE: It has 3 sections of extendibility to offer
variable height which are secured with
Aluminum knobs.

Loosen the first Aluminum knob to increase
the height of the telescopic legs, as shown in
the image.

Now, loosen the second knob to increase the
height and tight it properly.
2