Summary of Contents for Glow Bricks Lego TRANS FORMERS OPTIMUS PRIME
Page 2
First, take out the 2 plates at the bottom of the power cube and replace by the shown lighting parts...
Page 3
Then take the orange lighting parts for the axe Start by replacing the 2x2 round plate in the red circle by the lighting part...
Page 4
Then replace the 2x4 plates by the lighting plate on the top Then put the bricks back on the plate...
Page 5
For the 1x2 plate and the round plate next to the previous lighting plate, assemble them to the arch shown Place the remain lighting plate to the shown spot to replace the 1x6...
Page 6
Now the axe is ready Take the shown lighting parts for the feet...
Page 7
Turn the Prime around, take the shown lighting parts for the boosters...
Page 9
Get the remain lighting parts to assemble on the chest Remove all the parts in the red circles...
Page 10
Start from the grey lighting parts, remove the shown red part in purpose to move the remain lights behind Then assemble the grey lighting parts on the other side, remove the tiles in between to hide the cables in between the studs...
Page 11
Then put the round tiles from the original plates on the lights At last connect with the USB cable and it’s done...
Page 12
Pull the remain lights to the chest area and assemble the yellow round plates first For the cable it could be hidden under the tile as shown...
Page 13
Put the Matrix back to the chest and assemble the orange lighting plate on it The cable to the connector would be get through by the gap of the window...
Page 14
Stabilize the cable by the backpack Now you should have 3 connectors at the back...
Page 15
Now you can light up the model by connecting the USB cable The power cube and the axe would be optional You can still transform to the truck with the lights assembled...
Page 16
Just follow the instruction to do the transformation, pull the connectors to the back and connect the USB cable again...
Need help?
Do you have a question about the Lego TRANS FORMERS OPTIMUS PRIME and is the answer not in the manual?
Questions and answers