Connecting The 1551B Laser Scanner - Intermec Sabre 1551B Quick Reference Manual

Connecting the 1551B Laser Scanner

You can connect the 1551B scanner to these Intermec products:
944X Portable Terminals
95XX Network Terminals
TRAKKER Antares
97XX Wedge Readers
JANUS™ 2010 Terminals (J2010 and JG2010)
To connect the scanner
1. Turn off the
reader/terminal.
2. Connect the modular
plug on the interface
cable into the bottom of
the scanner handle.
3. Tighten the screw using
a medium-sized,
straight-slot screwdriver
to secure the plug in the
scanner handle.
4. Connect the other end of
the cable to the
reader/terminal.
If you are using a power
supply, connect the
power supply to a
power outlet and the
reader/terminal plug.
Note: The cable connector plug for the reader/terminal will vary
according to the cable ordered.
For more help installing, configuring, and programming your
scanner, refer to the 1551B Decoding Laser Scanner User's Manual
(Part No. 066104) or find the manual on the internet at
www.intermec.com/manuals/1551b/1551.htm.
242X Terminals
Scanner
handle
Screw
Modular
plug
Interface
cable
155XQG.002
7