Hands-Free Scanning - Intermec Sabre 1551B Quick Reference Manual

2. Adjust the scanner distance to the bar code and the position
of the laser beam to make sure every bar and space is
scanned.
*HI*
INCORRECT
3. When you get a successful read the laser beam turns off, the
scanner beeps once, and the light turns green.

Hands-Free Scanning

You can use your 1551B laser scanner with a scanner stand for
hands-free scanning. To order a scanner stand, see "Accessories
for the Scanner" later in this guide.
Note: If your scanner stand does not have a small magnet in the
holder, you need to upgrade your stand using upgrade kit part number
066799.
To use the scanner stand
1. Place the scanner
handle on the
bottom ledge of the
holder and then
rotate the handle in
the holder until it
locks into place.
2. Align the scanner
and adjust the
column height so
that the pulsating
laser beam covers
the entire label on
the base of the stand.
*HI*
CORRECT
155XQRG.006
Holder
155XQG.005
9