Intermec Sabre 1514 User Manual page 12

Decoding Laser Scanner User's Manual
For definitions of the technical terms used in this manual, see
the glossary.
Conventions for Bar Codes
You can use your laser scanner to scan the bar codes listed in
this manual to enter data or perform a command. The bar codes
are Code 128. The bar code is listed along with the command
name and syntax. For example:
Command
Select 300 baud
Conventions for Input From a Keyboard or Keypad
When you need to press keys on your terminal or reader, they
are emphasized in bold. For example, "press Enter" means you
press the key labeled "Enter" on your keyboard or keypad.
Conventions for Commands
This example illustrates the format conventions used for
commands:
To send serial commands, use this syntax (spaces
have been added for clarity):
STX ESC XX [optional parameters] ETX
where:
STX
ESC
XX
ETX
xii
Syntax Bar Code
DA
is the ASCII start of text
command.
is the ASCII escape command.
is the two-letter bar code
syntax for the command.
is the ASCII end of text
command.