European Union Compliance; Additional Emi/Rfi Compliance - Intermec Sabre 1517 Supplementary Manual

Intermec sabre 1517: supplementary guide
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Avertissement: Aucune des pièces internes du modèle 1517/1519 ne peut être réparée par l'utilisateur.
L'utilisation d'appareils de contrôle et d'ajustement ainsi que l'exécution de procédures d'utilisation autres
que celles qui sont indiquées dans la présente publication peuvent entraîner une exposition dangereuse à la
lumière laser pouvant atteindre jusqu'à 1,0 mW à 670 nm.
Remarque: Aucun appareil de contrôle ou d'ajustement n'est fourni pour les opérations de routine ou de
maintenance de l'appareil 1517/1519.
The label shown below is attached to the side of the 1517/1519 laser scanner:
USA CANADA
C A U T I O N
LASER LIGHT - DO NOT STARE
INTO BEAM
REGARDER DANS LE FAISCEAU
670nm LASER DIODE - 1.0mW MAX
CLASS II LASER PRODUCT
PRODUIT LASER CLASSE II
CAUTION - LASER LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
PRODUCT CONFORMS TO U.S.A. DHHS 21 CFR SUBCHAPTER J
ATTENTION - LUMIERE LASER LORS DE L'OUVERTURE
NE PAS REGARDER FIXEMENT DANS LE FAISCEAU.
1517/1519 Manual Supplement
(For Users Outside of Canada or the United States)
Place this supplement in your manual.

European Union Compliance

This product complies with EN 55022, EN 50082-1, EN 60950, and EN 60825 as
required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the
Low Voltage Directive 73/23/EEC as amended by 93/68/EEC.
TÜV Approval
This product is TÜV licensed EN 60950 and EN 60825.

Additional EMI/RFI Compliance

This device meets the Class B limit requirements of CISPR 22.
1517/1519 Laser Compliance and Precaution
The 1517/1519 complies with the following standards for laser safety:
IEC 825 / EN 60825 - Class 2 Laser Product
The 1517/1519 has a maximum output of 1,0 mW at 670 nm.
The 1517/1519 is provided with the label illustrated on page 4 of this supplement installed. Page 10 of this
supplement shows a illustration of the additional labels that are provided for user's not in Canada or the
United States. These labels contain important safety information for the user. If you are not in Canada or the
United States, you MUST locate the sheet of labels that were shipped with your 1517/1519 and replace or
cover the existing label with the appropriate label for your country.
A T T E N T I O N
LUMIERE LASER - NE PAS
1.0mW - 670nm
1517/19S.001
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sabre 151915171519

Table of Contents