Charging The Lithium Ion Batteries - Intermec PB20 Quick Start Manual

Charging the Lithium Ion Batteries

S The printer battery charges in about 3 hours.
LED Battery Indicators
LED State of Charge
Solid Red In Progress
Green Complete
Slow Red Flashing Low Temperature or
battery is disconnected
Fast Red Flashing High Temperature
Slow Red and Orange Low Voltage
Flashing
Fast Red and Orange High Voltage
Flashing
Slow Orange Flashing Timeout
Fast Orange Flashing Internal Error
Beep Indicator
Number of Beeps
One
Two
Three
One long beep
Determining Current Battery Power
To determine the current charge on the battery pack, print out a
self test by pressing and holding the red self-test button for four
seconds. If the battery is good, you will see the abbreviation for
the word "GOOD" next to the Battery voltage print out.
4
Action
Waiting for green LED
Remove Charger
Change environment or
connect battery
Change environment
Wait for solid red
Wait for solid red
Restart charge
Remove battery to pow-
er down completely and
reconnect. Or unplug
from charging source,
wait 15-20 seconds and
reconnect.
Indicates
Printer has come out of sleep mode
Printer is out of paper
Battery is low
No program in printer, only boot code
PB20 Printer Quick Start Guide