Intermec PB20 Quick Start Manual page 13

5 Click Next to proceed. A search for Bluetooth devices is per-
formed followed by a look-up of discovered device names.
The progress bars indicate the inquiry status.
6 A list of discovered devices displays.
If your remote wireless printer is discovered and presented in the
list, select the appropriate check box and click Next.
If your remote device is not displayed, ensure that the device
and its radio are switched ON. Click Next, then select Finish.
7 A progress bar appears indicating Service Directory is being
performed.
If the discovery is successful a screen with Successful discovery
displays. Click Finish. The remote device icon appears in the
Bluetooth Devices Folder. Verify that this device was discovered
by looking at the properties (Device>Properties).
If the Services tab lists Portable Printer, the service was discov-
ered correctly.
If it doesn't, select the Update button on the Services tab to try
to rediscover the services available (sometimes it will take a cou-
ple tries to correctly discover the services).
8 Click Next twice, all Wireless Printing devices within range
will be discovered and displayed. You may have to repeat this
step from time-to-time.
9 The Bluetooth Serial Port service is necessary for the virtual
COM port to work. Choose COM6 in your application to
use the Wireless Printing device you selected. Verify that this
service was discovered by looking at the properties for this
printer (Device>Properties).
10 Verify that your Wireless Printing device is set as your "favor-
ite" device. In the Bluetooth Devices Folder, select
Tools>My Favorite. In the Favorites screen, ensure your
printer shows as My Favorite Device.
*Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
PB20 Printer Quick Start Guide
13