Loading Paper - Intermec PB2 User Manual

Loading Paper

PB2 Mobile Printer User's Guide
• For maximum battery life, Intermec recommends charging the
battery at 25°C (77°F).
• Remove the battery from the printer before storing the printer for
long periods of time.
• The battery storage temperature is -20°C to 40°C (-4°F to 104°F).
Do not store a fully charged battery at temperatures greater than
40°C (104°F) for long periods of time – the battery may
permanently lose charge capacity.
• Dispose of battery according to local regulations. Do not throw in
trash.
• Do not disassemble, short circuit, heat above 80°C (176°F), or
incinerate. The battery may explode.
For more information, see the
To prevent possible damage to the print mechanism, use only
receipt paper rolls that are not fastened to the inside core in any
way. Otherwise the core will be pulled into the mechanism
causing jamming and possible gear damage.
To load paper
1 Press the Paper Door button to open the paper compartment
door.
PB2 and PB3 Battery Instructions.
7