After Using The Steam Brush; Cleaning And Care; Descaling; Storage - Silvercrest SDRB 1000 B1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
If your clothes are heavily creased, use the
steam function by pressing the steam burst but-
ton
. To produce steam, set the temperature
control
If the heat-up indicator lamp
operation, do not press the steam blast button
again: wait a few seconds until the heat-up
indicator lamp
goes out.
Only repeat pressing the steam burst button
until the heat-up indicator lamp
water drips from the ironing sole
the heat-up indicator lamp
initiating another burst of steam.
NOTE
If you press the steam burst button
the heat-up indicator lamp
the appliance will produce condensation
instead of steam, and water will drip from the
ironing sole
.
If the water tank runs dry during operation
pull the mains plug
To set the appliance down briefly during opera-
tion, unfold the stand
the appliance on it. To resume use of the appli-
ance, simply fold the stand

After using the steam brush

Set the temperature control
Always disconnect the plug
power socket after use.
Empty the water tank
opening
of the water tank
pliance upside down and swinging it gently.
SDRB 1000 B1
lights up during
lights up or
. Wait until
goes out before
while
is illuminated,
before refilling it.
to the front and lean
back to the rear.
to "MIN".
from the mains
by opening the filler
, turning the ap-

Cleaning and care

WARNING – RISK OF INJURY!
Always disconnect the mains plug
cleaning the appliance. There is a risk of
electric shock! Allow the appliance to cool
down. Risk of burns!
CAUTION
Do not use aggressive cleaning agents. These
may damage the surfaces.
Clean the housing with a soft, dry cloth only.
Clean the metal parts of the appliance with a
damp cloth and a mild, non-scouring detergent.
To clean the ironing sole
damp cloth and a small amount of dish soap.

Descaling

If the appliance produces less steam over time,
,
descale the steam brush.
You can do this with a regular descaling agent
containing citric acid. Adhere to the instructions
of the descaling agent.

Storage

CAUTION
Unplug the mains plug
pliance to cool down before putting it away.
Risk of fire!
Store the appliance in a dry place. You can
hang the appliance up by the hanger
before
, wipe it with a
and allow the ap-
.
GB │ IE
21
│ 

Advertisement

Table of Contents
loading

Table of Contents