Table of Contents
Advertisement
11.5.7 Installing the roll-holder
WARNING! This item must be installed by qualified personnel.
▪ secure the two supports to the stretcher as shown in the figure below (Fig. 1);
Fig. 1
▪ assemble the pole with the sheet roll (Fig. 2) making sure that the pin (4) in the pole housing
is inserted into the appropriate hole in the pole (Fig. 3).
Fig. 2
1
11.5.8 Functional test
ATTENTION! The following check must be repeated periodically to verify the
efficiency of the product.
Before putting the item into use:
▪ check if the accessory is correctly fixed to the stretcher structure by referring to the paragraph
"Roll-holder installation";
▪ if the check is successful, the item is ready to be put into regular service, otherwise contact
Customer Service immediately.
ID05449 - Rev. 0.1 - 01/12/2020
Fig. 3
41
Advertisement
Table of Contents
