Table of Contents
Advertisement
11.1.5 Preparing the installation area
The bars are installed on the accessory-holder supports located at the 4 corners of the Pam
Mobility stretchers and are fixed by means of a screw. It is advisable to install the accessory
before commissioning the stretcher.
11.1.6 Installing the bar
WARNING! This item must be installed by qualified personnel.
WARNING! Always check that the bar is installed correctly before use.
To install the bar proceed as follows:
▪ insert the bar (1) into one of the 4 holes for the insertion of accessories on the head or foot
side and secure it by tightening the screw, as shown in the photo.
11.1.7 Functional test
ATTENTION! The following check must be repeated periodically to verify the
efficiency of the product.
Before putting the item into use:
▪ check if it works correctly by referring to the paragraph "Operation and use" of this accessory;
▪ if the check is successful, the item is ready to be put into regular service, otherwise contact
Customer Service immediately.
32
1
ID05449 - Rev. 0.1 - 01/12/2020
Advertisement
Table of Contents
