Table of Contents
Advertisement
11.4 Monitor/tablet-holder with variable height code 7M009017
11.4.1 Technical presentation
The variable height monitor/tablet-holder consists of a curved chrome-plated steel pipe, at the
end of which there is a preformed plexiglass surface with two nylon straps for securing of the
monitor. The pole is equipped with a clamp for height adjustment.
11.4.2 Intended use
The device is intended to be installed on Pam Mobility stretchers to support a monitor/tablet.
Environment of use: within healthcare and health facilities.
The device cannot be used in a potentially explosive or flammable atmosphere.
Personnel intended for use of the product: specialist operators and doctors.
11.4.3 Name of the parts
1. Pole;
2. Monitor-holder surface;
3. Fastening straps;
4. Rod fixing/height adjustment lever;
5. Nylon bushing for accessory insertion on stretcher mesh surface.
11.4.4 Preparing the installation area
The variable height monitor/tablet-holder must be installed on Pam Mobility stretchers. It is
advisable to install the accessory before commissioning the stretcher.
11.4.5 Identification
ATTENTION! It is forbidden to remove
the label from the item for any reason.
The following label is affixed to the item:
38
2
3
<Lot>
MD
<Anno>
IT
= Kg
<C.l.s.>
UDI
1
4
5
Pam Mobility srl
Via Verdi, 39 - 42043 Gattatico (RE) Italy
Tel. +39 0522 473859
info@pammobility.com
NOME ARTICOLO
<Descrizione Articolo>
<ID CODICE>
<SERIAL NUMBER>
<Vettore UDI>
ID05449 - Rev. 0.1 - 01/12/2020
Advertisement
Table of Contents
