11.3.8 Operation and use
ATTENTION! Do not use the item for any purpose other than the following.
WARNING! Never exceed the safe work load of the accessory.
WARNING! Always make sure the item is securely attached to the stretcher before
putting it into use.
WARNING! The tools must not in any way protrude from the configuration of the
stretcher, as they could hinder the movements of the stretcher, could be in the way
and therefore cause injuries to the operator and patient resulting from a possible
fall, and cause damage to the stretcher itself.
To use the monitor-holder system, proceed as follows:
▪ make sure that the support is well installed to the stretcher and attach the tools to the
horizontal bar.
ID05449 - Rev. 0.1 - 01/12/2020
37