Table of Contents
Advertisement
6.10 Longitudinal translation
WARNING! Always notify the patient before carrying out the manoeuvre.
ATTENTION! Before carrying out any manoeuvre, make sure that the brake is
engaged.
WARNING! Before moving the stretcher, return the bed surface to the initial
position.
The PULSE stretcher is equipped with a mechanism
that allows translation of the bed surface longitudinally
in order to make it possible to examine the areas
normally hidden by the structure.
To move the bed surface, proceed as follows:
▪ make sure that the stretcher brake is engaged (see
page 17 of this manual);
▪ grip the top with both hands through the mattress
stopper bar 16;
▪ at the same time use the yellow lever
bed surface in the direction indicated by the arrow.
Once the desired position is reached, let go of the
release lever 17.
ID05449 - Rev. 0.1 - 01/12/2020
17
17
and pull the
16
25
Advertisement
Table of Contents
