Peel Off Length; Permanent Save; Print Configuration Label; Print Mode - Intermec EasyCoder PD41 Programmer's Manual

Peel Off Length

Purpose:
Default Peel Off Lengths
203 DPI Printhead
300 DPI Printhead

Permanent Save

Purpose:
Default:

Print Configuration Label

Purpose:

Print Mode

Purpose:
Default:
30
Sets the default distance the label should stop
before the tear off bar when the printer is in Peel
Off mode. Distance is measured in dots.
PB50 PD41 PF2/4i PM4i PX4/6i
60 44
N/A 60
Stores all downloaded formats and images in the
printer's memory. The next time the printer
starts up, saved formats and images are loaded
and ready for use. Turning Permanent Save off
does not delete saved items, but they are not
loaded automatically when the printer starts up.
Off
Note: If you are downloading your graphics or
formats as you print, turn off Permanent Save to
increase processing speed.
Prints the current ZSim configuration settings
on a label.
Determines the printer operating mode and sets
the label origin to suit the corresponding mode:
Tear Off, Peel Off, Cutter, or Rewind.
Tear Off
44 44
66 60
ZSim Programmer's Guide
60
100