Line Analyzer
Purpose:
Default:
Log to Card
Purpose:
Default:
LTS
Purpose:
Default:
Media Contrast
Purpose:
Default:
Media Type
Purpose:
28
Determines whether to print received data on
the label.
Off
Logs the received data to a file on a
CompactFlash card. You can use the log file for
later analysis. This feature is not supported on
the PB50.
Off
Turns the label taken sensor (LTS) on or off.
Off
Adjusts the darkness and contrast of the
printout. You can adjust this value from 0 to 30.
Has influence only on the Fingerprint setup
parameter "Contrast." A value of 15
corresponds to the Fingerprint contrast value
0%.
15 (0% in Fingerprint)
Sets the type of media used in the printer.
Choices include: Continuous, Non-continuous
with Mark, or Non-continuous with Gap.
Terms that appear in the Media Type command
are Zebra-specific. Use the following table to
understand how to select the correct media type.
Zebra-Specific
Non continuous web
Non continuous mark
Continuous
Intermec Printer
Label with gaps
Ticket with marks
Fixed length strip
ZSim Programmer's Guide