Parts Included; Pre-Assembly; Need Help - Horizon Fitness TR3.0 Owner's Manual

TABLET/READING RACK
CONTROL PANEL & DISPLAY
WINDOWS
TABLET/READING RACK
WATER BOTTLE HOLDER
PULSE GRIP HANDLEBARS
ON/OFF SWITCH
POWER CORD
MOTOR COVER
CAUTION WARNUNG
KEEP HANDS AND FEET AWAY HALTEN SIE HÄNDE UND FÜSSE
FROM THE MOVING PARTS. VON BEWEGLICHEN TEILEN FERN.
TRANSPORT WHEEL
10
CONSOLE
WATER BOTTLE HOLDER
HANDLEBAR
SAFETY KEY
CONSOLE MAST
SIDE RAIL
RUNNING DECK / RUNNING BELT
ROLLER END CAP
REAR ROLLER
TENSION/ALIGNMENT BOLTS
PRE ASSEMBLY
TOOLS INCLUDED:
F
6 mm L-Wrench
F
6 mm T-Wrench
WARNING

PARTS INCLUDED:

DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift
F
1 Console Assembly
treadmill from packaging until specified to do so in the assembly
F
2 Console Masts
instructions. You may remove the plastic wrap from console masts.
F
1 Hardware Kit
F
1 Safety Key
UNPACKING
F
1 Bottle of Silicone Lubricant
Place the treadmill carton on a level flat surface. It is recommended that you place
(for 2 applications)
a protective covering on your floor. Take CAUTION when handling and transporting
F
1 Power Cord
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled and in the
F
2 Handlebars
upright folded position, with the lock latch secure. Unpack and assemble the unit
where it will be used. The enclosed treadmill is equipped with high-pressure shocks
and may spring open if mishandled. Never grab hold of any portion of the incline
frame and attempt to lift or move the treadmill.
WARNING

NEED HELP?

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
If you have questions or if
there are any missing parts,
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
contact Customer
partially threaded in before completely tightening any ONE bolt.
Tech Support.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
11