Tools Included; Pre-Assembly; Parts Included - Horizon Fitness T101 Owner's Manual

WATER BOTTLE HOLDER
CONSOLE FAN
GRIP PULSE HANDRAILS
ON/OFF SWITCH
POWER CORD
MOTOR COVER
CAUTION ATTENTION PRECAUCIÓN
KEEP HANDS AND FEET GARDEZ VOS MAINS ET VOS MANTENGA LAS MANOS
AWAY FROM THIS AREA. PIEDS À L'ÉCART DE CET Y LOS PIES ALEJADOS DE
HIGH-PRESSURE ENDROIT. DES COUPS ESTA ÁREA. DESCARGAS
SHOCKS COULD À HAUTE PRESSION DE ALTA PRESIÓN
CAUSE BODILY INJURY. PEUVENT CAUSER DES PODRÍAN OCASIONAR
BLESSURES CORPORELLES. LESIONES FÍSICAS.
RUNNING BELT/RUNNING DECK
TRANSPORT WHEEL
FOOT LOCK LATCH DECAL
(UNDERNEATH FOOT LATCH)
8
HZ19_T101-5_OM_r1_0_D.indd 8-9

TOOLS INCLUDED:

WATER BOTTLE HOLDER
F 6 mm T-Wrench
CONTROL PANEL AND DISPLAY WINDOWS
F 5 mm L-Wrench
F 4 mm T-Wrench
F Phillips Screwdriver

PARTS INCLUDED:

SPEAKERS
F 1 Console Assembly
SAFETY KEY PLACEMENT F 2 Console Masts
F 1 Hardware Kit
F 1 Safety Key
F 1 Audio Adapter Cable
F 1 Bottle of Silicone Lubricant
(for 2 applications)
CONSOLE MAST
F 2 Console Mast Covers
F 1 Power Cord
FOOT LOCK LATCH (UNDERNEATH DECK)
SIDE RAIL
If you have questions or if
there are any missing parts,
ROLLER END CAP
REAR ROLLER
TENSION/ALIGNMENT BOLTS
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this
unit. Never open box when it is on its side. Once the banding straps have been removed,
do not lift or transport this unit unless it is fully assembled and in the upright folded
position, with the lock latch secure. Unpack and assemble the unit where it will be used.
The enclosed treadmill is equipped with high-pressure shocks and may spring open if
mishandled. Never grab hold of any portion of the incline frame and attempt to lift or
move the treadmill.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove
the plastic wrap from console masts.
WARNING
NEED HELP?
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
contact Customer Tech
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
Support.
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
9
3/21/19 10:19 AM