Download Print this page
Bishamon LX25SA Operation And Service Manual

Bishamon LX25SA Operation And Service Manual

Super low profile lift tables

Advertisement

Quick Links

Explanation of Terms and Symbols
Warning
Caution
In this manual, 「
」 , 「
」 are defined and specified as below. Notice of Warnings are
very important for safe operations. As these are very Important to protect operators from accidents
resulting in personal injury and death, and damage to property, so make sure to read thoroughly and
understand fully before operation.
Warning
Incorrect operation may result in serious injury or death of the operator.
Caution
Incorrect operation may result in injury and damage to the property.
The

Advertisement

loading
Need help?

Need help?

Do you have a question about the LX25SA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bishamon LX25SA

  • Page 1 Explanation of Terms and Symbols Warning Caution In this manual, 「 」 , 「 」 are defined and specified as below. Notice of Warnings are very important for safe operations. As these are very Important to protect operators from accidents resulting in personal injury and death, and damage to property, so make sure to read thoroughly and understand fully before operation.
  • Page 4 If it is necessary to go under the raised Lift pla t form for repair or servicing the Lift, make sure to remove the load and the scissor mechanism is securely blocked in the open position. For Model LX300, use Maintenance Pin. If dirt or obstacles etc.
  • Page 5 Never put hands or feet under the platform when raising or lowering the Lift. SEVERE PERSONAL INJURY could result. ・ If "Up" button and "Down" button are pressed at same time, first pressed takes priority. ・ If "Up" and "Down" foot pedal are deressed at same time, "Up" pedal takes priority. ・...
  • Page 6 If it is necessary to go under the raised Lift pla t form for inspection or servicing the Lift, make sure to remove the load and the scissor mechanism is securely blocked in the open position. For Model LX300, use Maintenance Pin. Ⓐ...
  • Page 7 ● Lowering Speed is already adjusted and set at factory with specified load. It is not recommended to change the lowering speed faster which could be danger. ● Changing lowering speed without load could result in faster speed when loaded and could be danger. ●...
  • Page 11 3-21, 4-Chome, Hongo-Cho, Takahama City, Aichi, Japan 444-1394 Tel. 81-566-53-1126, Fax. 81-566-53-1844 http//www.bishamon.co.jp/...