Read this manual carefully and understand completely before operating lifters. Keep filing this manual for
future reference. If this copy is lost, please contact your local supplier for a replacement.
Explanation of Terms and Symbols
Warning
In this manual, 「
very important for safe operations. As these are very Important to protect operators from accidents
resulting in personal injury and death, and damage to property, so make sure to read thoroughly and
understand fully before operation.
Warning
Caution
The
DO NOT use lifter on slope, unlevel
or soft surface. Lifter may become position. SEVERE PERSONAL
unstable and /or uncontrollable.
SEVERE PERSONAL INJURY and
PROPERTY DAMAGE could result.
NEVER go under forks.
SEVERE PERSONAL INJURY or
DEATH could result.
DO NOT put hand near chain
sprocket or other moving parts.
SEVERE PERSONAL INJURY
could result.
Caution
」 , 「
」 are defined and specified as below. Notice of Warnings are
Incorrect operation may result in serious injury or death of the operator.
Incorrect operation may result in injury and damage to the property.
Always travel with forks in lowered
INJURY and PROPERTY DAMAGE forks. SEVERE PERSONAL INJURY
could result.
DO NOT overload lifter.
ALWAYS stay within designated
capacity and load center rating.
KEEP FEET CLEAR of rolling
wheels that could result in
SEVERE PERSONAL INJURY.
DO NOT load one fork more than
other and DO NOT load tips on
or DEATH could result.
USE ONLY in areas clear of all
personnel and objects to prevent
severe personal injury and property of control and result in SEVERE
damage.
Replace chain every four years or if
inspection reveals excessive wear on
links, pins, side plates and deformed,
bent, rusted or broken links.
- 1 -
NEVER sit, stand or ride on forks.
SEVERE PERSONAL INJURY or
DEATH could result.
DO NOT use in areas of multi level
floor surface that could create loss
PERSONAL INJURY.
DO NOT put hand near Scissor
mechanism or other moving parts.
SEVERE PERSONAL INJURY
could result.
Need help?
Do you have a question about the LV50W and is the answer not in the manual?
Questions and answers