Technical Data - DeLonghi MAGNIFICA START ECAM22 2 Series Instructions For Use Manual

PROBLEM
The infuser cannot be extracted.
On completion of the descale cycle, the
machine calls for a further rinse
The milk has big bubbles
The cup tray on top of the machine is hot A number of drinks have been prepared
The machine emits noises or small puffs
of steam while not in use

18. TECHNICAL DATA

Voltage:
Power:
Pressure:
Water tank capacity:
Size LxDxH:
Cord length:
Weight (varies according to model):
Beans container capacity:
De'Longhi reserves the right to modify the technical specification
and styling of its products at any moment, without compromis-
ing their functionality and quality.
POSSIBLE CAUSE
The machine has not been turned off.
During the two rinse cycles, the water
tank has not been filled to the MAX level
The milk is not cold enough, or is not
semi-skimmed or skimmed.
Cappuccino maker dirty.
Vegetable drinks have been used.
in rapid succession
The machine is ready for use, or has re-
cently been turned off, and condensate is
dripping into the hot vaporiser.
220-240 V~ 50-60 Hz max. 10 A
1450 W
1.5 MPa (15 bars)
240x440x350 mm
1250 mm
8.8 kg
1.8l
250g
21
REMEDY
Turn the machine off by pressing the
button.
Restart the descaling procedure from "Step
3: Second rinse".
Use skimmed or semi-skimmed milk at
refrigerator temperature (about 5° C). If
the result is not as desired, try changing
the brand of milk.
Remove the components and clean them
thoroughly.
The effect varies widely depending on
the nutritional properties of the drinks.
This is part of normal operation. To limit
the phenomenon, empty the drip tray.