Units Of Measurement - ICON Level Pro ProScan Getting Started

ProScan
®
Programming
This function sets the units for all measurement values to be entered into the sensor. The choices for units are feet and meters.
The unit is shipped with a Factory Default Setting of feet.
Basic Settings
Display
Diagnostic
OK
Service
Information
1. From the Main Screen,
2. Arrow repeatedly until the arrow is next to Service.
OK
3. to advance into the Service menu (False Echo Memory will appear).
4. Arrow repeatedly until the menu shows Units of Measurement.
OK
5. to advance into Units of Measurement.
6. Arrow to change the setting between feet [ft (d)] and meters [m (d)].
7. When the units are correct,
BK
8. When done, to return to the Main Menu,
BK
and a second time to return to the Main Screen.
Quick-Start

Units of Measurement

OK
OK
to advance into the Main Menu.
OK
to save the setting.
}
Factory Default is Ft
Basic Settings
Display
Diagnostics
Service
Info
False Echo Memory
Current Output
Reset
Units of Measurement
Factory Default - Ft
28.00
Levelpro
Basic Setting
Display
Diagnostics
Service
Info
Basic Setting
Display
Diagnostics
Service
Info
Echo curve
Change ?
Units of measurement
ft (d)
Units of measurement
m (d)
ft (d)
ft
06