ICON Level Pro ProScan Getting Started page 10

ProScan
®
Program Max Fill Height
OK
Basic Settings
Display
Diagnostic
Service
Info
1. From the Main Screen
to advance into the Basic - Sub- Programming - Min Adjustment Menu.
OK
2.
3.
to Enter into Sub Menu.
4.
OK
to advance into Max. Adjustment. The first percentage segment will be highlighted.
OK
5. again to switch to the distance (d) setting.
6. to move one segment to the right.
7. to increase the value of the number highlighted.
8. When the value is correct
BK
9. When done
to return to the Main Menu, and
if you want to advance directly into Full Configuration
Quick-Start
} 20mA
OK
Min Adjustment
Max Adjustment
Max Fill Height is the Distance from the Tip
of the Sensor to the Highest Liquid Level
Max Adjustment is the 20mA Set-Point
OK
OK to advance into the Main Menu
will scroll left to right and then back to the first segment.
OK
to save the setting.
Enter this
Measurement for
Your Max
20mA
4mA
will scroll from 0 to 9 and back again.
BK
a second time to return to the Main Screen
100%
Measurement
Max
Location
0%
28.00
Levelpro ft
Basic Setting
Display
Diagnostics
Service
Info
Max. Adjustment
0.00%
28' 00" 00 ft (d)
Dist 07 05"m (d)
Max. Adjustment
000. 00 %28'
00" 00 ft (d)
Dist 07 05"m (d)
Max. Adjustment
000.00%
28' 00" 00 ft (d)
Dist 07 05"m (d)
Max Adjustment
0 0 00.00%
00.00%
28' 00" 00 ft (d)
07 05"m(d)
Dist Dist
Max. Adjustment
100.00%
28' 00" 00 ft (d)
Dist 07 05"m (d)
08