Getting Started; Setting Up - Panasonic KX-TGM470C Operating Instructions Manual

Getting Started

Setting up

Connections
Connect the AC adaptor to the unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the unit, then to the
single-line telephone jack (RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is required if you have a DSL/
ADSL service.
Note:
R The AC adaptor and telephone line cord come connected to the base unit at the time of
shipment.
R Use only the supplied Panasonic AC adaptor.
*1 PNLV226: KX-TGM470
PNLV236: KX-TGM490
3
5
4
Handset battery charging
2 rechargeable Ni-MH batteries are installed in the handset at the
time of shipment.
Before initial use: Remove the yellow insulation sheet before
using the handset.
For assistance, visit www.panasonic.ca/english/support
12
TGM470_490C(en)_0805_ver403.pdf
*1
1
4
2
12 2021/08/05 10:23:27