Panasonic KX-TGM470C Operating Instructions Manual page 67

Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
The 2nd caller's information is
not displayed during an outside
call.
For assistance, visit www.panasonic.ca/english/support
TGM470_490C(en)_0805_ver403.pdf
Cause/solution
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service may not be available in some
areas. Contact your phone service provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may
display or announce the caller's information at the 2nd
ring or later.
R Move closer to the base unit.
R The handset or base unit's ringer volume is turned off.
Adjust it (page 32, 43).
R The Talking Caller ID feature is turned off. Turn it on
(page 44).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 59).
R If the base unit and another handset are having an
intercom call, your handset does not announce caller
information.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 53).
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 44).
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your phone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your phone
service provider again to activate this specific service,
even if you already subscribed to both Caller ID and Call
Waiting with Caller ID services (CWID).
67
Useful Information
67
2021/08/05 10:23:31