Panasonic KX-TGM470C Operating Instructions Manual page 47

*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 21).
*4 If you subscribe to a distinctive ring service, select one of the ringers ("Ringer 1" to
"Ringer 5").
*5 The preset ringers in this product ("Ringer 6" - "Ringer 15") are used with permission
of © 2004 - 2013 Copyrights Vision Inc.
*6 If you select one of the ringers ("Ringer 1" to "Ringer 5"), select the desired frequency
("Frequency 1" to "Frequency 6").
*7 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*8 For models with supplied key detectors, the display shows "1: Detector1".
*9 If you register 2 or more key detectors.
*10 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*11 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*12 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
For assistance, visit www.panasonic.ca/english/support
TGM470_490C(en)_0805_ver403.pdf 47
Programming
47
2021/08/05 10:23:30