Getting Started Setting Up - Panasonic KX-TGE434 Operating Instructions Manual

Getting Started
Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
3
4
5
1
2
For assistance, please visit http://shop.panasonic.com/support
10
TGE43xUS(en)̲0222̲ver231.pdf 10
n Charger
Battery installation
R USE ONLY rechargeable Ni-MH batteries
R Do NOT use alkaline/manganese/Ni-Cd
R Confirm correct polarities (
4
R Follow the directions on the display to set
Connect the AC adaptor to the power
outlet.
1
AAA (R03) size ( ).
batteries.
1
up the unit.
1
, ).
2018/02/22 14:44:57