7.
Install the access panel.
8.
Slide the server into the rack.
9.
Connect the LAN segment cables.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server (Power up the server).
Energy pack options
Hewlett Packard Enterprise offers two centralized backup power source options to back up write cache content on P-class
Smart Array controllers in case of an unplanned server power outage.
HPE Smart Storage Battery
•
HPE Smart Storage Hybrid Capacitor
•
IMPORTANT: The HPE Smart Storage Hybrid Capacitor is only supported on Gen10 and later servers.
One energy pack option can support multiple devices. An energy pack option is required for P-class Smart Array
controllers. Once installed, the status of the energy pack displays in HPE iLO. For more information, see the HPE iLO user
guide on the Hewlett Packard Enterprise website (https://www.hpe.com/support/ilo-docs).
HPE Smart Storage Battery
The HPE Smart Storage Battery supports the following devices:
Hardware options installation
135