Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Resource Ulisse Dining
Summary of Contents for Resource Ulisse Dining
- Page 1 ASSEMBLY INSTRUCTIONS Ulisse Dining...
- Page 2 Warranties for all products purchased from Resource Furniture, LLC are only valid if the product has been properly assembled, Installed by a trained professional, and operated in accordance with the assembly instructions. Resource Furniture accepts no responsibility for any damage or injury caused by Improper Installation.
- Page 3 Ulisse Dining ULISSE MATTRESS Recommended weight: ~ 66lbs Recommended size: 78 3/4 x 59 x 7inches...
- Page 4 Ulisse Dining...
- Page 5 Ulisse Dining...
-
Page 6: Back Panels
Ulisse Dining DESCRIPTION CODE RIGHT SIDE PANEL LEFT SIDE PANEL TOP HORIZONTAL PANEL BOTTOM HORIZONTAL PANEL BED BASE BACK PANELS SPLINE TO JOIN LOWER BACK PANELS SPLINE TO JOIN LOWER BACK PANELS DINING TABLE DINING MECHANISM ALLEN WRENCH Ø 3 MM ALLEN WRENCH Ø... - Page 7 A’ Pins B’ Cams Wood screws to attach C’ back panels to structure Machine bolts for attaching D’ dining mechanism to structure Wall mounting angle brackets E’ F’ Machine bolt to attach bed G’ base to structure H’ I’ J’ K’...
- Page 8 Ulisse Dining ASSEMBL Y OF THE STRUCTURE IMAGE 1 Screw 4 (A) pins into both the(1) right vertical and (2) left vertical panels. Attach the (3) horizontal top and (4) horizontal bottom panel to the vertical panels by inserting and tightening 8 (B) cams.
- Page 9 Ulisse Dining Ulisse Dining Attaching the dining mechanism to the structure Attach the dining mechanism to the structure using 4 machine bolts (D).
- Page 10 Wand Lighting Penelope /Ulisse/ Altea/Telemaco Installation Guideline for • Headboard must be installed on site before light fixture • Drill 1/2” hole at 10 1/4” above headboard and 1 1/2” in from the side • Install mounting Plate with provided wood screws, aligning the 1/2” drill holes 30 3/8"...
- Page 11 Ulisse Dining IMAGE 21: Ensure that the structure is level and plumb. To compensate for any floor unevenness, use the adjustable feet on the bottom panel (det. 21a) to level the structure. detail...
- Page 12 Ulisse Dining After the unit is level and plumb it should be securely attached to the wall using the metal angle mounting brackets as shown in the images below. A proper wall anchor suitable for the wall’s construction must be selected by the contractor or installer.
- Page 13 Ulisse Dining ADAM / ADAM TAVOLO Connecting the bed base to the structure Hold the bed base in the horizontal position( Image 4), lining up the holes in the side panels with the holes in the bed base(Image 5) Insert and fasten machine bolt (G) on the left and right side of the bed base.(Do not...
- Page 14 Ulisse Dining The pistons can only be installed after the structure has been anchored to the wall and the bed base is securely attached to the structure. (as shown in image 4,5,6) • Remove the pistons from the sides of the bed by loosening the "acorn" nut.
- Page 15 Ulisse Dining Connecting the Pistons Connecting the pistons requires a minimum of 2 installers. p.08...
- Page 16 Insert the metal brackets of the dining mechanism through the holes in the front panels. Use machine bolts (N) to attach the dining mechanism to the bed base.
- Page 18 Grasp one of the legs or the edge of the steel and store. frame of the bed to pull down. Ulisse Dining: Remove articles from table Make sure to support the bed frame for surface that are more than 1” high the entire descent until both bed legs are firmly resting on the floor.
- Page 19 Ulisse Sofa: Do not grasp or attempt to lift HAVE A GREAT DAY! the sofa! Lift only the bed frame! Ulisse Dining: Do not grasp or attempt to lift the table! Lift only the bed frame! Just one more thing – you can stand...
Need help?
Do you have a question about the Ulisse Dining and is the answer not in the manual?
Questions and answers