Resource LGM Safely Operating

SAFELY OPERATING YOUR
LGM
OPENING YOUR LGM BED
If you have an LGM model with a table, fold
1
the table down before opening the bed. While
standing in front of the table, fold each leg
up to the center. When you hear the magnets
click, the legs are secure. Support the table
as you lower it down to the closed position.
Locate the silver release knob located on the
2
right side of the bed. Push the knob down to
release the internal safety latch.
While holding the knob in the downward
3
position, pull the shelving towards you. Once
the bedframe has started to rotate, grasp the
panel behind the shelving to make it easier to
pull.
Continue to rotate the bed until the shelving
disappears, the mattress is completely visible,
and you hear an audible click as the safety
lock engages on the top left side of the
structure.
For older LGM models, you must fold the legs
4
down before opening the bed. This releases
the safety latch that prevents the bed from
opening on its own.
Forcing the bed down without unfolding the
legs to release the safety latch can result in a
broken bed frame and a substantial repair.
Once the legs have been folded down, pull
5
the legs or the metal bed frame forward and
support the bed as it gently reaches the fl oor.
Please make sure that the area in front of the
LGM is clear of any obstructions.
To extend the integrated nightstands, locate
5
the recessed panels on either side of the bed
frame and push to open.
For older LGM models, reach under the bed to
locate the recessed fi nger pull and slide the
nightstands out.