Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Resource Circe
Summary of Contents for Resource Circe
- Page 1 Assembly Instructions Circe Sofa...
- Page 2 Warranties for all products purchased from Resource Furniture, LLC are only valid if the product has been properly assembled, Installed by a trained professional, and operated in accordance with the assembly instructions. Resource Furniture accepts no responsibility for any damage or injury caused by Improper Installation.
- Page 3 CIRCE SOFA OVERVIEW 86 5/8 48 1/4 86 5/8 63 1/2 CIRCE SOFA MATTRESS SPECIFICATIONS Recommended weight: ~ 66 lbs Recommended dimensions: 78 3/4 x 59 x 7” Recommended dimensions with headboard: 75 x 59 x 7”...
- Page 4 CIRCE SOFA OVERVIEW...
- Page 5 CIRCE SOFA OVERVIEW Note: bed base cannot be disassembled...
- Page 6 CIRCE SOFA COMPONENTS CODE QTY. COMPONENTS Right side panel Left side panel Top horizontal panel Bottom horizontal panel Bed base Sofa base Lower back panels Spline to join lower back panels Sofa seat Sofa arm Triangular sofa base plates Angle bracket to attach sofa arm to structure of bed...
- Page 7 CIRCE SOFA STRUCTURAL HARDWARE CODE QTY. COMPONENT DESCRIPTION 7 x 36 6MA Pins D15 L17 Cam Connectors Wood screws for attaching 3.5 x 20 back panels to structure Wooden dowels for attaching 10 x 60 sofa arms to Structure Washer for attaching sofa...
- Page 8 STRUCTURE ASSEMBLY Screw 6 (A) pins into both the (1) right vertical and (2) left vertical panels. Attach the (4) horizontal bottom panel; (3) horizontal top panel and (14) structural shelf to the vertical panels by inserting and tightening 12 (B) cams.
- Page 9 STRUCTURE ASSEMBLY Attach the (7) lower back panels to the structure using (C) wood screws. Insert (8) back panel spline into lower back panel. Then place the (7) upper back panel on top of the spline, fastening it to the structure using (C) wood screws. Attach the (13) top back panel to the structure using (C) wood screws.
- Page 10 STRUCTURE ASSEMBLY Insert the (15) shelf using the (M) shelf support.
- Page 11 OPTIONAL WAND LIGHTING Drill 1/2” hole at 40 1/2” measured from the bottom of the structure (from inside) and 1 1/2” in from the side. Install mounting Plate with provided wood screws, aligning the 1/2” drill holes. Wand Light Exploded Diagram Cord Length = 118”...
- Page 12 LEVELING THE STRUCTURE Ensure that the structure is level and plumb. To compensate for any floor unevenness, use the adjustable feet on the bottom panel (det. 21a) to level the structure. detail 21a...
- Page 13 WALL BED ATTACHMENT After the unit is level and plumb it should be securely attached to the wall using the metal angle mounting brackets as shown in the images below. A proper wall anchor suitable for the wall’s construction must be selected by the contractor or installer.
- Page 14 MATTRESS BAR INSTALLATION Fasten the (16) mattress support bar to the (5) bed frame using the attached bolt to each bar. Mattress bar must be installed before the bed base is inserted into the structure.
- Page 15 BED BASE INSTALLATION Inserting the bed base into the structure.
- Page 16 BED BASE INSTALLATION Attach the bed base to the structure using 4 machine bolts (J).
- Page 17 BED BASE INSTALLATION Attach the (11) triangular metal sofa plates to the (5) bed base using 3 (H) hex screws on both sides. Attach the (11) triangular metal sofa plates to the (6) sofa base using 1 (H) machine bolt and 1 (I) conical washer on each side.
- Page 18 SOFA ARM INSTALLATION IMAGE 8 Insert 8 (D) wooden dowels into the top four holes on both the left and right vertical panels. Insert and secure the (F) threaded rods into the lowest hole on both the left and right vertical panels. Insert 8 (D) wooden dowels into the top four holes on both the left and right vertical Position the 2 (10) armrests in front of the left and right panels, lining up the holes on the armrests with the panels.
- Page 19 SOFA SEAT CUSHION INSTALLATION Place the (9) sofa seat cushion on the (6) sofa base, wrapping the excess fabric around the back of the sofa frame and fastening with velcro ( detail 13a). CIRCE SOFA detail 12a detail detail 14a...
- Page 20 SOFA FRAME INSTALLATION Secure the levers at the front of the sofa base to the armrests using 2 (H) machine bolts and 2 (I) conical washers.
- Page 21 BED OPERATION To open the bed, gently lift one of the two legs upwards so that it unlocks the safety latch directly above it. If the leg is lifted too much (lying perpendicular to the structure), pull down on the safety latch directly above. Do NOT attempt to open the bed without unlocking the safety latch.
- Page 22 Make sure to support the bed frame for the entire descent until both legs are resting on the fl oor. NOTE: The Circe Sofa will then be safely locked in place in the open position. Release the two mattress straps by squeezing the center of the clasp.
- Page 23 Just one more thing – you can stand on principle, but never stand on the sofa! NOTE: Your Circe Sofa is designed so that most bedding can remain on the bed when closed. If you experience diffi culty closing the bed, your bedding might be too thick.
- Page 24 ResourceFurniture.com...
Need help?
Do you have a question about the Circe and is the answer not in the manual?
Questions and answers