Single and Multidock Installation
Electrical Requirements
The single and multidocks contain a power supply that uses
the alternating current (ac) power from your outlets. The
docks come with a six foot universal power cord and there-
fore must be located within that distance of an outlet. The
outlets must be grounded (three-prong) and with sufficient
capacity to carry the load for the number of docks and other
electrical devices per circuit breaker.
If you are uploading and downloading data with the host
computer you will need to have data jacks close by. You will
also need to have communication cables for connecting the
docks to the jacks. The connectors are identified in this
booklet but cables are not provided in the installation kit.
Your salesperson will help you with ordering the necessary
cables.
2-2
6100 Series Dock Installation Instructions
SECTION 2