Intended Use; Operation Mode; Technical Maintenance; Transportation And Storage - RoboLabs VTN Series Operating Manual

2. Intended use

2.1. Operation mode

Plug the warmer in the mains. Flip the main switch 1 to turn illumination,
heating, and blower. Load the product inside, not more than 3 kg on each shelf.

3. Technical maintenance

DISCONNECT ELECTRIC PLUG BEFORE CLEANING!
DO NOT WASH ELECTRIC PARTS OF THE MACHINE WITH WATER!
DO NOT USE SHARP TOOLS OR ABRASIVES FOR CLEANING!
WAIT UNTIL MACHINE IS COOLED DOWN BEFORE CLEANING!
The aim of technical maintenance is to keep the equipment in order during
whole lifetime; and also to fulfill safety requirements.
Use a slightly dampen, soft cloth to clean the surfaces, wipe dry immediately
after cleaning. The recommended maintenance schedule is below:
PROCEDURE
Inner and outer surfaces cleaning

4. Transportation and storage

The equipment may be transported by any kind of covered vehicle, in
accordance with transportation rules for this kind of vehicle.
Ambient temperature during the transportation and storage must be between
minus 25°C to +55°C.
1
The period may vary. Cleaning must be done as necessary.
PERIOD
1
once a day
tm1641 Jan-20
6