Troubleshooting - Skil BB9504-00 Owner's Manual

TROUBLESHOOTING

Problem
Tool will not start.
Tool does not come
up to speed.
Belt/disc does not
rotate while motor is
running.
Cause
1. Power cord is not plugged
in.
2. Fuse or circuit breaker
tripped.
3. Cord damaged.
4. Switch not functioning.
1. Extension cord too light or
too long.
2. Low house voltage.
1. Drive belt is too loose or
broken.
Remedy
1. Plug in the power cord.
2. Replace fuse or reset tripped circuit
breaker.
3. Have cord replaced by an
Authorized SKIL Service Center or
Service Station.
4. Have switch replaced by an
Authorized SKIL Service Center or
Service Station.
1. Replace with adequate cord.
2. Contact your electric company.
1. Have the drive belt tighten or
replaced by an Authorized SKIL
Service Station.
27