Displaying The Switch Module Map; Information (E-Keying Information) - NEC SIGMABLADE N8406-017 Manual

Displaying the switch module map information (E-Keying information)
Overview
Displays the port mapping information about specified switch modules.
Command name
SHOW SWITCH PORT MAP
Argument
<slot number> | <slot number> - <slot number> | <slot number> , <slot number> | "ALL"
<Slot number> and „-„(hyphen) or „,‟(comma) must be separated by a blank space.
Example of execution
> show switch port map all
Status
------
8: <absent>
7: <absent>
6: <absent>
5: OK
Port
Status
Blade
Mezz/Nic
Port
4: <absent>
3: <absent>
2: <absent>
1: OK
Port
Status
Blade
Mezz/Nic
Port
1Z34AB7890(Administrator)>
Example of execution of the command to display switch module port map information (E-Keying information )
Default value
Supplementary information
Port*1
Status
Blade
Mezz/Nic
Size Technology Product Name
---- ---------- ------------
Single PCIe
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Single Ethernet
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Switch module port number
The port status of the switch module. OK: Normal (E-Keying is matched),
Mismatch: E-Keying is mismatched, No Connect: No connection between the switch
module and mezzanine card
The number of the CPU blade connected to the port of the switch module.
The number of mezzanine card connected to the switch module port or the number
corresponding to the standard slot (for LAN)
Virtual I/O Switch
OK OK
9 10
2 2
1 1
1Gb Intelligent L2 Switch
OK
10
NI
1
77