Switch And Jumper Settings - NEC IE-789136-NS-EM1 User Manual

3.6 Switch and Jumper Settings

(1) Switch and jumper settings on the IE-78K0S-NS
When using the IE-789136-NS-EM1, set the switches and jumpers on the IE-78K0S-NS as shown in Table 3-3.
For details of these switch and jumper settings, refer to the IE-78K0S-NS User's Manual (U13549E).
Setting
Caution If the jumpers and switches are set incorrectly, the board may be damaged.
(2) Switch and jumper setting on IE-78K0S-NS-A
When using the IE-789136-NS-EM1, set the switches and jumpers on the IE-78K0S-NS-A as shown in Table 3-4.
For the position of the switches and jumpers, refer to the IE-78K0S-NS-A User's Manual (U15207E).
Caution If the jumpers and switches are set incorrectly, the board may be damaged.
(3) Switch setting on the IE-789136-NS-EM1
The initial setting of the switch on the IE-789136-NS-EM1 is as shown in Table 3-5. For details, refer to 3.2
Clock Settings.
30
CHAPTER 3
Table 3-3. Switch and Jumper Settings on IE-78K0S-NS
SW1 SW3
OFF All switches ON
Table 3-4. Switch and Jumper Settings on IE-78K0S-NS-A
SW1
Setting OFF
Table 3-5. Initial Setting of Jumper on IE-789136-NS-EM1
Setting
User's Manual U14363EJ2V0UM
INSTALLATION
SW4 JP1
All switches ON 2 to 3 shorted
JP1 JP3
1-2 Shorted (fixed)
SW1
All switches OFF
JP4
1 to 2 shorted