Restarting A Switch Module; Configuring A User Assigned Name Of A Switch Module - NEC SIGMABLADE N8406-017 Manual

Default value
Supplementary information

Restarting a switch module

Overview
Restarts the specified switch module
Command name
RESTART SWITCH
Argument
<slot number>
Example of execution
1Z34AB7890(Administrator)> restart switch 4
Entering anything other than 'YES' will result in the command not executing.
Are you sure you want to restart the Switch Module? YES
Resetting Switch Module in slot 4.
1Z34AB7890(Administrator)>
Default value
Supplementary information
Type YES when the instruction is shown on the screen.

Configuring a User Assigned Name of a switch module

Overview
Assigns a name to the specified switch module
Command name
SET SWITCH NAME
First argument
<slot number>
Second argument
<User Assigned NAME>
Up to 32 alphanumeric characters or symbols (blank, hyphen, and underscore)
Example of execution
1Z34AB7890(Administrator)> set switch name 1 Switch1
Changed the user assigned name for Switch Module #1 to "Switch1".
1Z34AB7890(Administrator)>
Example of execution of the command to configure a user assigned name of the switch module
Example of execution of the command to restart switch modules
74