PROAIM P-CNL-3MC Assembly Manual page 2

Curve-N-Line Video Camera Slider Setup
•
Loosen the knobs of both end feet to adjust
them as per your requirement.
•
Using an allen key, unscrew the bolts from
both ends of the slider to attach the end feet.
•
Attach the camera mounting plate assembly
onto the slider and tighten it with the help of
the knob provided.
•
Attach one end of the provided 3m wire with
the motor and another end with the remote
controller as shown.
Foam with Bag Packing
2
Tighten This Knob