Table of Contents
Advertisement
Static electricity
Do not touch connector pins directly to prevent static electricity from causing damage.
-
Always rid yourself of any static electricity before handling this product.
-
If excessive static electricity is applied to the panel surface, the LCD panel may be damaged.
-
Power supply
Twist the wires of the power supply.
-
The unit has sufficient noise immunity against the noise generated on the power line. However, it is
-
recommended to take measures for reducing noise such as using an isolating transformer before
supplying the power. And it is recommended to take measures such as installing a ferrite core.
Allocate an independent wiring for each power supplying line, PLC etc and operating device.
-
If using a power supply without a protective circuit, power should be supplied through a protective
-
element such as fuse. Directly applying an abnormal voltage to the unit may cause the damage to the
internal circuit.
3-3
Advertisement
Table of Contents
